Choose a profile
Your details
We'll only use these to contact you about this quote — and so we can follow up if you get interrupted.
We use this address to suggest your AS 4055 wind region. You can still change the region manually later.
Choose a profile


What type of roofing system?
How would you like to give us your roof size?
Choose the option that suits your project best.
What are the dimensions of the roof system?
Roof Cover
Provide the measurements of the total roof cover in metres using dimensions A and B as shown below.
Typical patio fall is about 2%. Adjust if your design differs.
Measure from ground level to the underside of the roof on the low side of the fall.
Typical overhang is 300mm. Adjust if your design differs.
Upload your plans
Upload photos or PDFs of the dimensions / layout. You can upload multiple files.
Choose your colours
Panels, beams, posts, flashings and gutters use our UniCote colour range. Choose each finish separately below.
Do you need posts, beams, flashings, or other accessories?
We supply the full range of accessories required to complete your roofing system. This includes post, beams, flashings, gutters, screws, paint and more. See here for our full range.
Do you need installation?
Site & engineering details
These details let us size panels, beams and posts from the Delta Module A engineering tables. If you are unsure, choose the closest option — we will list assumptions on your draft order.
Suggested from your site address using Geoscience Australia wind-region maps (indicative — Standards take precedence). You can still change it.
How is the roof attached to the house? Select one, then continue.
Use Type 1P only for backyard lifestyle awnings that meet Module A blockage limits; otherwise choose Type 1.
Terrain category
Choose the option that best matches the surroundings around the site. Select one, then continue.
Shielding
How shielded is the site from prevailing winds? Select one, then continue.
Full shielding needs multiple rows of houses upwind (not available on steep sites). In cyclonic regions C/D, trees do not count as shielding.
Topographic class
Is the site on flat ground, or on a hill? Select one, then continue.
How steep is the hill?
Choose the steepest slope through the site. Select one, then continue.
Topographic class: T0
Where do you want it delivered?
Let us know more about the installation?
You'll need to arrange your own council approvals in advanced. Our builders are qualified and can provide the installation certificates.
Set on the previous site details step
Change it on the Site & engineering step if needed.
You're almost there!
Our panels are the highest quality and are made in Australia. Thanks for supporting local!
Thank you for your quote request!
We'll get back to you within 2 business days for supply only and within 5 business days for supply and installation.